The Tandberg StorageLibrary T160+ combines high capacity and performance in 12U form factor. The Tandberg StorageLibrary T120+ offers outstanding value for IT departments that need to perform large, unattended backups, and who require flexibility, reliability and a future proof technology.
The Tandberg StorageLibrary T160+ Series incorporates the new Pass-Thru feature, allowing you to add additional drives and storage capacity as and when you need it. The Pass-Thru feature will allow up to four T40+ units to be stacked together in a 19” rack configuration.
- High density with up to 241.6TB compressed in 16U
- Performance up to 13.8 TB/h (compressed)
- Drive Technology: LTO-3, LTO-4
- Number of Drives: 1-8 Full-Height or 1-16 Half Height
- Number of Cartridges: 151
- Ultra SCSI LVD, SAS & Native FC connection
- Write Once Read Many (WORM) support for regulatory compliance
- 3 years factory warranty and 1 year ARS
The Tandberg StorageLibrary T160+ tape library is a professional backup and data protection solution, providing maximum performance and scalable capacities.
The Tandberg StorageLibrary T160+ incorporates the new Pass-Thru feature, allowing you to add additional drives and storage capacity as and when you need it. With the Pass-Thru feature, customers can initially purchase one T40+ unit, and add a second and even a third or fourth unit when required, to create a StorageLibrary T80+, StorageLibrary T120+ or StorageLibrary T160+.
The Tandberg T160+, consisting of 4 StorageLibrary T40+ units, holds 151 slots. Each base unit can be installed with up to 4 half height LTO drives or 2 full height LTO drives and full supports LVD SCSI, Native Fibre Channel and SAS connectivity.
The Tandberg T160+ is designed to improve efficiency and minimize IT downtime. The Performance on Demand (POD) feature allows users to add additional drives or upgrade to the next LTO generation, increasing the library’s performance and capacity. The Web browser-based remote management interface allows you to monitor, control, configure and diagnose problems from anywhere in the world.
The T160+ supports system monitoring via SNMP. It also supports SMTP, and will immediately send an e-mail on any error.
The T160+ is supplied with redundant power supplies per T40+ unit. The second power supply provides redundancy for mission critical operations and avoids power interruption to the library. Both power supplies share the load under normal operating conditions. However, if one of the power supplies fails, the other will assume the full load.
The T160+ tape library provides outstanding value for IT managers that need to perform large, unattended backups, and who require flexibility, reliability and a future proof solution.
The StorageLibrary T160+ comes with a 1 year Advanced Replacement Service warranty (component level only) and a 3 year factory warranty.
All these features make the StorageLibrary the midrange library of choice.
Media Compatibility
The Tandberg StorageLibrary T120+ is compatible with industry standard, multi-sourced LTO media. To achieve the best reliability, Tandberg LTO branded and qualified data cartridges are recommended.
*assumes 2:1 data compression
